Orchid Technology

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame
5000 series
5020 series
KIS50 SERIES
KIS40 SERIES
SHAFT AND HOLLOW SHAFT ENCODER
ABSOLUTE ENCODER -- CANOPEN / PROFIBUS / PROFINET
8.5000.8351.1024
8.5020.4A51.1024

The incremental encoders type Sendix Base KIS40 / KIH40 withoptical sensor technology have been designed for highest costeffectiveness.They are available with a resolution of up to 2500pulses per revolution.They are particularly suitable for tight mounting spaces and smallmachines and appliances.
Compact and robust•
•Only 40 mm outer diameter.
•Ideally suited for use where space is tight.
•Sturdy bearing construction in Safety Lock™ design.
•Safe commissioning: reverse polarity protection andshort-circuit proof.Flexible
•Maximum resolution of 2500 pulses per revolution.
•Power supply 5 V DC or 10 ... 30 V DC.
•Push-pull, RS422 or open collector
•Radial or axial cable.

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame5000 series/5020 series/KIS50 SERIES/KIS40 SERIES

clamping-synchro flange, ø 40 mm [1.57“]
ø 6 x 12.5 mm [0.24 x 0.49“], with flat
push-pull (with inverted signal) / 5 ... 30 V DC
radial cable, 2 m [6.56‘] PVC
500PPR

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame
5000 series
5020 series
KIS30 SERIES
KIS40 SERIES
SHAFT AND HOLLOW SHAFT ENCODER
ABSOLUTE ENCODER -- CANOPEN / PROFIBUS / PROFINET
8.5000.8351.1024
8.5020.4A51.1024

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame
5000 series
5020 series
KIS30 SERIES
KIS40 SERIES
SHAFT AND HOLLOW SHAFT ENCODER
ABSOLUTE ENCODER -- CANOPEN / PROFIBUS / PROFINET
8.5000.8351.1024
8.5020.4A51.1024

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame
5000 series
5020 series
KIS30 SERIES
KIS40 SERIES
SHAFT AND HOLLOW SHAFT ENCODER
ABSOLUTE ENCODER -- CANOPEN / PROFIBUS / PROFINET
8.5000.8351.1024
8.5020.4A51.1024

The incremental encoders type Sendix Base KIS40 / KIH40 withoptical sensor technology have been designed for highest costeffectiveness.They are available with a resolution of up to 2500pulses per revolution.They are particularly suitable for tight mounting spaces and smallmachines and appliances.

HOLLOW SHAFT
Clamping flange, ip65
10mm dia
push/pull 10...30v DC
AXIAL CALE
1000 PPR

Product available as per the customer requirement,
Our product is highly appreciated by customers


Price Range - 5000 - 7000 Rupees.

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame5000 series/5020 series/KIS50 SERIES/KIS40 SERIES

Shaft Version Encoderø ø 12 mm [0.47“]
clamping flange, IP65 ø 58 mm [2.28“]
Push-Pull / 10 ... 30 V DC
axial cable, 3 m [3.28 ft] PVC

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame5000 series/5020 series/KIS50 SERIES/KIS40 SERIES

with stator coupling, IP65, ø 63 mm [2.48“]
ø 12 mm
push-pull / 10 ... 30 V DC
radial cable, 5M PVC

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame5000 series/5020 series/KIS50 SERIES/KIS40 SERIES

with torque stop, long, IP65
ø 14 mm
push-pull / 5 ... 30 V DC
radial cable, 1 m [3.28‘] PVC
1024 PPR

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame5000 series/5020 series/KIS50 SERIES/KIS40 SERIES

clamping flange, IP65 ø 58 mm [2.28“]
ø 10 x 20 mm [0.39 x 0.79“]
push-pull / 10 ... 30 V DC
axial cable, 5 m  PVC
2500 PPR

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame5000 series/5020 series/KIS50 SERIES/KIS40 SERIES

with torque stop, long, IP65
ø 10 mm [0.39“]
push-pull (7272 compatible) / 5 ... 30 V DC
radial cable, 1 m [3.28‘] PVC
1024 PPR

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame5000 series/5020 series/KIS50 SERIES/KIS40 SERIES

with stator coupling, IP65 ø 65 mm [2.56“]
ø 10 mm
push-pull / 10 ... 30 V DC
radial cable, 2 m [3.28‘] PVC

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame5000 series/5020 series/KIS50 SERIES/KIS40 SERIES

synchro flange, IP65 ø 58 mm [2.28“]
ø 6 x 10 mm [0.24 x 0.39“]
RS422 / 5 V DC
2500 PPR

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame5000 series/5020 series/KIS50 SERIES/KIS40 SERIES

with stator coupling, IP65, ø 63 mm [2.48“]
ø 10 mm
push-pull / 10 ... 30 V DC
radial cable, 3M length PVC
1024 PPR

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame
5000 series
5020 series
KIS30 SERIES
KIS40 SERIES
SHAFT AND HOLLOW SHAFT ENCODER
ABSOLUTE ENCODER -- CANOPEN / PROFIBUS / PROFINET
8.5000.8351.1024
8.5020.4A51.1024

High temperature up to max. 110°CThe incremental encoders of the high temperature series 5803 / 5823 can be used up to max. 110°C. The high heat resistance and high speed make these encoders the ideal solution for all applications in an environment of very high temperatures.

Powerful

• Suitable for temperatures up to max. 110°C.
• High resolution with up to 5000 pulses per revolution.
• Maximum speed of 12000 revolutions per minute.
• Flexible
• Different connection types for different applications.
• Shaft and hollow shaft variants
• With push-pull or RS422 interface.

Shaft Type

• 8 mm hollow shaft, through
• 10 mm hollow shaft, through
• 12 mm hollow shaft, through

Price Range - 5000 - 7000 Rupees.

Highly interpolatable – ideal for drive technology.The incremental encoders Sendix 5814 / 5834 with SinCos interface are preferably used in drive technology.Due to their very high signal quality, they are ideally suited for further interpolation.

Powerful

• With incremental SinCos traces.
• Very high signal quality.
• Suitable for extreme applications.

Flexible

• Shaft and hollow shaft variants.
• Cable and connector variants.
• Different mounting variants available.

Shaft Type

• 12 mm hollow shaft, through
• 14 mm hollow shaft, through
• 15 mm hollow shaft, through
• 3/8

Make- kuebler
hollow encoder
with stator coupling ip65
15mm dia
push-pull/10..30v dc
radial M23 Connector 12pin

For heavy duty applications – extremely robust hollow shaft encoders.

The incremental encoder Sendix H120 is ideal for large motors and generators. It is highly accurate and extremely robust thanks to HD-Safety-Lock™ - the Heavy Duty hollow shaft design of the latest generation with strong bearing construction and integrated bearing insulation. The double-protected shaft, the wide temperature range and the high protection enable use even under the most adverse conditions. The particularly large hollow shaft up to 28 mm, the variety of mounting solutions and connection variants offer maximum flexibility during installation.

Robust:

• Integrated bearing insulation of up to 2.5 kV for reliable shaft connection.
• Extremely high resistance due to double protection of the shaft (protective cover disc and radial shaft seal), IP66 and IP67 protection as well as seawater resistant housing.
• High resistance to shock (200 g) and vibration (15 g).
• High interference immunity due to fiber optic transmission technology.

Flexible

• 3 mounting solutions: conical central mounting, cylindrical central mounting or through hollow shaft.
• Connection via cable, M12 or M23 plug, terminal box or fiber optic cable.
• Mounting arm on flange or cover. This means that the device can be rotated flexibly during mounting.
• Continuous hollow shaft up to 28 mm

Shaft Type

• 16 mm hollow shaft, through
• 20 mm hollow shaft, through
• 25 mm hollow shaft, through
• 28 mm hollow shaft, through
• 1

Suitable for tight installation spaces. The incremental compact encoders 3610 / 3620 with optical sensors are available up to a resolution of 2500 pulses per revolution.The versions with through hollow shaft are designed for diameters up to 8 mm.

Compact

• Only 36 mm and 38 mm outside diameter.
• Continuous hollow shaft up to 8 mm.
• Ideally suited for limited installation space.

Versatile

• Available with cable outlet or M12 plug.
• Maximum resolution 2500 pulses per revolution.
• Supply voltage 5 to 18 V DC or 8 to 30 V DC.

Shaft Type

• 6 mm shaft, with flat surface
• 1/4

Price Range - 5000 - 7000 Rupees.

Product available as per the customer requirement,
Our product is highly appreciated by customers

Price Range - 5000 - 7000 Rupees.

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame5000 series/5020 series/KIS50 SERIES/KIS40 SERIES

 clamping-synchro flange, ø 40 mm [1.57“]

ø 8 x 12.5 mm [0.32 x 0.49“], with flat

push-pull (with inverted signal) / 10 ... 30 V DC

radial cable, 2 m [6.56‘] PVC

1024 PPR

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame5000 series/5020 series/KIS50 SERIES/KIS40 SERIES

with stator coupling, IP65, ø 63 mm [2.48“]
ø 12 mm
RS422 / 5 V DC
radial cable, 1 m [3.28‘] PVC
2048 PPR

5000 series/5020 series/KIS50 SERIES/KIS40 SERIES
clamping flange, IP65 ø 58 mm [2.28“]
ø 10 x 20 mm [0.39 x 0.79“]
RS422 / 5 V DC
axial cable, 1 m [3.28 ft] PVC
3600 PPR

5000 series/5020 series/KIS50 SERIES/KIS40 SERIES

clamping flange, IP65 ø 58 mm [2.28“]
ø 10 x 20 mm [0.39 x 0.79“]
RS422 / 5 V DC
axial cable, 1 m [3.28‘] PVC
2500 PPR

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame
5000 series
5020 series
KIS30 SERIES
KIS40 SERIES
SHAFT AND HOLLOW SHAFT ENCODER
ABSOLUTE ENCODER -- CANOPEN / PROFIBUS / PROFINET
8.5000.8351.1024
8.5020.4A51.1024

High-resolution – for maximum accuracy.The incremental encoders 5805 / 5825 offer resolutions of up to 36000 pulses per revolution.When maximum accuracy is required, these encoders are the optimum sensor solution.

Strong performance

• High shaft load capacity.
• Maximum speed up to 12000 revolutions per minute.
• High IP protection up to max. IP66.

Many Variants

• With RS422 or push-pull interface.
• With cable or plug connection

Price Range - 5000 - 7000 Rupees.

Large hollow shaft up to 42 mm.
The incremental encoder A020 with optical sensor technology is available with through hollow shaft up to a maximum diameter of 42 mm.With an installation depth of only 43 mm, it is ideally suited for mounting on large shafts even in tight installation situations.

Compact

• Low installation depth with large hollow shaft at the same time
• Available with compact M12 connector
• Torque brackets can also be implemented with a small radius

Flexible

• With push-pull, RS422 or SinCos interface.
• Hollow shaft from 20 mm to 42 mm as standard.
• With cable connection, M12 or M23 plug.

Shaft Type :

• 24 mm hollow shaft, through
• 25 mm hollow shaft, through
• 28 mm hollow shaft, through
• 30 mm hollow shaft, through
• 38 mm hollow shaft, through
• 40 mm hollow shaft, through
• 42 mm hollow shaft, through
• 1

Product available as per the customer requirement,
Our product is highly appreciated by customers

Price Range - 5000 - 7000 Rupees.

ø 10 x 20 mm [0.39 x 0.79“]
open collector / 5 ... 30 V DC
axial cable
360 PPR

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame5000 series/5020 series/KIS50 SERIES/KIS40 SERIES

with stator coupling, IP65, ø 63 mm [2.48“]
ø 10 mm
push-pull / 10 ... 30 V DC
radial cable, 1 m [3.28‘] PVC
200PPR

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame5000 series/5020 series/KIS50 SERIES/KIS40 SERIES


clamping flange, IP65 ø 58 mm [2.28“]
ø 10 x 20 mm [0.39 x 0.79“]
Push-Pull / 10 ... 30 V DC
axial cable, special length PVC 5M
1024 PPR

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame5000 series/5020 series/KIS50 SERIES/KIS40 SERIES

clamping-synchro flange, ø 40 mm [1.57“]
ø 8 x 12.5 mm [0.32 x 0.49“], with flat
push-pull (with inverted signal) / 10 ... 30 V DC
radial cable, 2 m [6.56‘] PVC
360PPR

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame5000 series/5020 series/KIS50 SERIES/KIS40 SERIES

clamping flange, IP65 ø 58 mm [2.28“
ø 10 x 20 mm [0.39 x 0.79“]
Push-Pull / 10 ... 30 V DC
axial cable, special length PVC 2M
1024PPR

We offer Encoder Kubler which are used for encoding the electricity into mechanical data. Our Encoder Kubler are designed in such way that these can bear harsh and wear & tear conditions of different industries. The range of encoders is available in distinct models which are cost effective as well. These can be availed in bulk to our clients that too within the stipulated time frame5000 series/5020 series/KIS50 SERIES/KIS40 SERIES

clamping flange, IP65 ø 58 mm [2.28“]
ø 10 x 20 mm [0.39 x 0.79“]
push-pull / 10 ... 30 V DC
Axial cable 5m
1000PPR